BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ Manual transmission and transmission a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and security measures
   + Leaving and repair of damages of a body
   - External elements of a body
      Removal and installation of a forward bumper
      Removal and installation/check of shock-absorbers of a bumper
      Removal and installation of a back bumper
      Removal and installation of the back shock-absorber
      Removal and cover installation обтекателя
      Removal and installation of a forward wing
      Removal and cowl installation
      Cowl adjustment
      Removal and installation of a cover of a luggage carrier
      Adjustment of a cover of a luggage carrier
      Removal and installation of the lock/cylinder of the lock of a cover of a luggage carrier
      Removal and installation газонаполненного an emphasis of a cowl/cover of a luggage carrier
      Replacement молдингов and model emblems
      Removal, installation and door adjustment
      Removal and installation of facing of a door
      Removal and installation of the lock of a door
      Removal and installation of the cylinder of the lock
      Removal and installation of the external handle of a door
      Removal, installation and window adjustment
      Removal and installation electric window lifterа
      Removal and electric motor installation window lifterа
      Removal and installation of a mirror of an external kind / a sound signal of a high-pitch tone
      Removal and installation of glass of a mirror
      Removal and installation of the case of a mirror of an exterior
   + Internal elements of a body
+ Onboard electric equipment
+ Electric equipment schemes



Removal and installation of the lock of a door

To have possibility of moving of a window of a door at the removed lateral pillow of safety, it is necessary to disconnect quickly a negative cable (-) the storage battery. Thereof in memory of malfunctions corresponding record is made. After work end it is recommended to clear memory thereby to provide normal work of a pillow of safety. Address to Section Diagnostics of malfunctions. Work it is desirable to spend HUNDRED in conditions.


 REMOVAL

1 Close a window of a forward door, other windows remain opened.
2 Disconnect a negative cable (-) the storage battery at the switched off ignition. The battery is in a luggage compartment behind a cover on the right side. At cars BMW 316i, 318i the battery settles down in an impellent compartment.

As a result of switching-off of the storage battery the data from memory of malfunctions of some monitors is erased. If necessary before battery switching-off it is necessary to consider the given memories of malfunctions. Address to Section Diagnostics of malfunctions. Work it is desirable to spend HUNDRED in conditions.

3 Isolate a negative cable (-) at the storage battery to exclude possibility of casual contact.
4 remove door facing, uncover doors in a back part, address to corresponding section.
5 Disconnect a window only from the tyre back window lifterа, address to Section Removal and installation electric window lifterа.
6 Displace a window completely upwards.
7 Disconnect the tyre back window lifterа, take out it downwards and put below in doors, address to Section Removal and electric motor installation window lifterа.
8 Door of the driver: Remove the lock cylinder, address to corresponding section.
9 Rasstykujte a socket at the door lock.

10 Take out a cover-1 small screw-driver. Loosen the the screw lying under it so that was heard distinct click.

Watch a rotation direction. On a door of the driver the screw rotates counter-clockwise, on a door of the forward passenger clockwise. After that the lock mechanism is in dismantle position.

11 Turn out screws-2 and take out the lock of a door-3 with draughts through a door aperture.


 INSTALLATION

Work of the lock of a door should be checked only at an open door. If the door is closed, and lock adjustment is executed incorrectly, the door cannot be opened without facing destruction.

It is not necessary to grease the lock of a door and скобу

12 Check up, whether has mobility the drive lever on the lock. If is not present, ослабьте the lock screw. The lock screw is located under a cover-1 on an illustration.

13 Insert the lock with draughts into a door. Thus draughts of the lock button insert through an aperture in door sheet. Do not deform draught.
14 Fix the lock new screws the moment 9 Н•м.
15 Join a socket at a lock door.
16 Door of the driver: Establish the lock cylinder, address to corresponding section.
17 Fix window lifter behind, address to corresponding section.
18 Establish into place door facing, address to corresponding section.

During joining of the storage battery in the car there should not be people

19 Attach a negative cable (-) the storage battery at the switched off ignition. Establish hours.

Check of work of the lock of a door

Work check is made only at an open door. If the door is closed also adjustment executed incorrectly, the door cannot be opened without facing destruction

20 Block a screw-driver the doggie on the lock-3.
21 Close a door a key.
22 Open a door a key, open a door the handle.

23 If the lock does not open, once again ослабьте the lock screw and tighten. The lock screw is under a cover-1 on an illustration.

24 Once again check up work of the lock of a door.
25 Establish a cover-1 in a door aperture.