The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ Manual transmission and transmission a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
- Дигностика electric elements
Diagnostics of malfunctions of an onboard electric equipment - the general information
Safety locks - the general information
Replacement of safety locks
Fusible inserts - the general information
Chain breakers (thermal relays) - the general information
The relay - the general information
Check of the electric motor of a screen wiper
Stoplight check
Check of warmed back glass
Removal and installation of the gauge of temperature
+ Illumination and the alarm system
+ Devices and the equipment
+ Electric equipment schemes
|
Stoplight check
1 If the stoplight at the pressed pedal of a brake does not light up, it is necessary to check up a corresponding safety lock at first.
2 If the safety lock is serviceable, check up stoplight lamps. If necessary replace them.
|
3 Check up the stoplight switch. For this purpose uncover over a brake pedal. Расстыкуйте a switch socket. |
4 Include ignition.
5 Connect a short auxiliary wire both contacts in the tip of the switch of a stoplight. If now the stoplight lights up, the switch is faulty also it it is necessary to replace.
6 Otherwise check up the light module. |
|