BMW 3 series E46

1 Remove, if is available, an atomizer фароомывателя, located under a headlight, address to Section Removal, installation and check of atomizers фароомывателя.
2 Open a cowl.

3 Release an internal peak-1 and squeeze out it downwards from holders-2.

4 Remove forward a peak on an outer side-3. For this purpose it is necessary to pull with force for a peak.
5 Rasstykujte all штекерные connections with a headlight underside.

6 Mark headlight position for what lead round a felt-tip pen of a washer of screws of fastening (an arrow on an illustration). Thanks to it at installation it will be possible to put a headlight in former position. Turn away screws of fastening of a headlight and remove it forward.

7 Insert a headlight and tighten fastening screws by hand.
8 Expose a headlight so that washers of screws of fastening have occupied the position marked at removal.
9 If the new headlight is established, pull it completely forward. Close a cowl and expose a headlight so that it coincided with a body contour. Open a cowl and tighten screws of fastening of a headlight.
10 Join a socket of lamps.
11 Establish a peak outside under a headlight, incline inside and fix.
12 Fix an atomizer фароомывателя if it is available, address to Section Removal, installation and check of atomizers фароомывателя.

In summary adjust a headlight on HUNDRED.