|
5 Check up presence of damages on фиксаторном a hook of a cover of the cylinder of the lock, if necessary a cover replace.
6 Put on the cylinder of the lock a cover and fix it.
7 Turn away a lock nut of the screw with internal шестигранником if it was fixed.
8 Insert the cylinder of the lock with a cover into a door aperture. Thus the cylinder pin should enter into the lock. If necessary insert a key into the cylinder of the lock and turn a pin a little.
9 Press the cylinder to a door and a little to a loop of a door and fix.
10 Wrap the screw with internal шестигранником.
|
|
Do not tighten the screw too strongly, differently the lock cylinder can jam. |
11 Insert a cover from outside a door end face. Press into an aperture at first an external part, then central. |