BMW 3 series E46

Since 1998 of release

Repair and car operation

Removal and installation of a cover of a luggage carrier

Cover of a luggage carrier, loop and газонаполненный the shock-absorber


1 — a luggage carrier cover 2 — a sealing lining 3 — a loop 4 — an emphasis 5 — a rubber cover 6 — газонаполненный an emphasis 7 — an emphasis 8 — an emphasis 9 — the handle with a lining 10 — a light disk For a lamp of illumination of licence plate 11 — a key with the microswitch 12 — a press plate 13 — a cover of the cylinder of the lock	14 — connecting draught 15 — a nut 16 — the lock 17 — скоба the lock 18 — a lining of the cylinder of the lock 19 — the lock cylinder 20 — a film 21 — a nut 22 — the holder of licence plate 23 — a remote washer 24 — felt 25 — a washer 26 — саморез 27 — a cover

REMOVAL

1 Disconnect facing of a cover of a luggage carrier, address to Section Removal and installation of facing of a cover of a luggage carrier.
2 Extend a plait of a cable from a luggage carrier cover. For this purpose расстыкуйте штекерные connections of illumination of licence plate and the uniform lock. Fix a cord on tips and extend a plait.

The cord remains in a cover of a luggage carrier and serves for simplification of installation of cables.

3 Mark position of a cover of a luggage carrier at loops. For this purpose lead round a lath of a loop a felt-tip pen.

4 Prop up reliably a cover of a luggage carrier and ask it to take the assistant.
5 Oslabte screws at the left and on the right-2, turn out the screw-3, 4 – an emphasis.

INSTALLATION

7 Put into place a cover of a luggage carrier by means of the assistant. Screw the screw-2 without tightening it.
8 Expose a luggage carrier cover according to the put marks and fix.
9 If the cover was replaced, adjust it.
10 Enter electric wires of a lamp of illumination of licence plate and the uniform lock by means of a cord into a cover of a luggage carrier and join them.
11 Fix the facing, the damaged clips replace.