Removal and installation of the tank/pump of a washer
The tank with pumps glass - and фароомывателя
1 — the washer tank
2 — a grid
3 — a cover
4 — the pump фароомывателя
5 — a grid
6 — the pump стеклоомывателя
7 — a grid
8 — the level gauge
9 — the heat-shielding screen
10 — саморез
11 — a nut
REMOVAL
1 Turn away bolts of fastening of the tank-1 to the left amortisation rack-2 and take out from bottom directing-3.
2 Rasstykujte a socket of the pump of a washer.
Attention: If it is necessary to replace only the pump, leave the tank in an impellent compartment. Prepare the new pump. Take out the pump from the tank and cover an aperture with a finger. At once put in an aperture on the tank the new pump.
3 Merge water from the tank in the corresponding capacity.
4 Remove a hose and take out the tank.
5 Take out the pump from the tank.
INSTALLATION
3 Merge water from the tank in the corresponding capacity.
4 Remove a hose and take out the tank.
5 Take out the pump from the tank.