BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ Manual transmission and transmission a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and security measures
   + Leaving and repair of damages of a body
   + External elements of a body
   - Internal elements of a body
      Removal and installation of forward peaks of the panel of devices
      Removal and facing installation forward parts of area of feet
      Removal and installation of the left ware box
      Removal and installation of the right ware box
      Removal and installation of the central console
      Removal and installation of the central armrest
      Removal and installation of a pocket of the console of switches
      Removal and installation of the console of switches
      Removal and installation of the electric motor of a drive сдвижной roof panels
      Removal and installation of a mirror of an interior
      Mirror of an interior with automatic blackout
      Removal and installation of lateral facing of a luggage carrier
      Removal and installation of facing of the back panel
      Removal and installation of facing of a cover of a luggage carrier
      Removal and installation of a headrest of a forward seat
      Натяжитель a seat belt. The basic data and security measures
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of atomizers стеклоомывателя
      Adjustment of atomizers стеклоомывателя
      Removal, installation and check of atomizers фароомывателя
      Removal and installation of levers of a screen wiper
      Removal and installation of the tank/pump of a washer
+ Onboard electric equipment
+ Electric equipment schemes



Removal and installation of the electric motor of a drive сдвижной roof panels

 REMOVAL

1 Remove a screw-driver a peak. Расстыкуйте a socket of the switch of a drive for what open blocking by compression.

2 Turn out screws of fastening by key Torx Т25.

3 Remove the block the electric motor - a reducer and расстыкуйте a socket.


 INSTALLATION

4 Establish into place the block the electric motor - a reducer and attach it. Fix it slightly the moment 3 НЧм two short screws-2 and one long-1. Necessarily establish new screws. If it is impossible, grease screws preliminary with means for fixing of carving connections, for example, Loctite 270.
5 Join a socket of the switch of a drive, establish a cover.

Initialization сдвижной panels


6 Establish сдвижную the panel in position of lifting and then press the switch сдвижной panels further in a direction “lifting Position”.
7 Hold the switch 5 with in position of lifting after:

- Each interruption of a food or
- Roof adjustments.

8 Hold the switch 20 with in position of lifting after:

- Malfunctions in work
- Detachments of a drive or
- Works with тросовыми draughts.

9 Initialization is considered finished if сдвижная the panel once again is shortly pressed in a direction “lifting Position” (click).