BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ Manual transmission and transmission a line
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Removal and installation brake колодок forward wheels
   Removal and installation directing forward brakes
   Removal and installation of a brake disk of a forward wheel
   Removal and installation brake колодок disk brakes
   Removal and installation скобы brakes of back wheels
   Removal and installation of a brake disk of a back wheel
   Measurement of a thickness of a brake disk
   Brake liquid - the basic data and security measures
   Removal of air from brake system
   Replacement of the brake pipeline
   Replacement of a forward brake hose
   Check of the amplifier of a brake
   Removal and installation колодок a lay brake
   Adjustment of a lay brake
   Removal and installation of the lever of a lay brake
   Removal and installation of a cable of a drive of a lay brake
   Removal and installation of the switch of a stoplight
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes


Діти

Check of the amplifier of a brake

Check up work of the amplifier of a brake if for achievement of necessary braking it is required to put excessively big effort to a brake pedal.

1 At the idle engine press a pedal of a brake not less than 10 times, then at the pressed pedal start the engine. Now the brake pedal should move aloud. In this case the amplifier is serviceable.
2 Otherwise disconnect a vacuum hose at the amplifier and start the engine. Put a finger to the end of a hose and check up, whether there is a vacuum.
3 If the vacuum is not present: Check up a vacuum hose on tightness and presence of damages, if necessary replace it. Tighten fastening of all collars.
4 Diesel engine: Disconnect a vacuum hose from the vacuum pump and check up a finger, whether there is a vacuum. The vacuum pump is fixed to a head of cylinders.
5 If the vacuum is available: Measure value of vacuum, if necessary replace the brake amplifier (work HUNDRED).

At the petrol engine necessarily replace also the return valve in the vacuum pipeline as the diaphragm in the brake amplifier at the faulty return valve owing to getting steams of fuel can be damaged.